Mounts, clips and clamps · 4 sizes
Edge Clips for Cable Ties, 1 to 6 mm Panel Edges
Push onto a panel edge; a metal clamp grips. Takes a 4.8 mm tie.
Order-inData centerFactory and panelSolar and outdoorRobotics and harness
Brought in against your order, so you get the full range without paying for stock we guessed at. Lead time 24 to 48 hours.
Every size
Tap + Add on the sizes you need, then send one quote request. We reply with price and a ship date within one business day.
Where edge clips are used
- Routing wiring along sheet metal edges without drilling
- Vehicle and equipment frames
- Solar racking edges
How to choose
Choose by panel thickness (1 to 3 mm or 3 to 6 mm) and by whether the tie enters from the top or the side. They take a 4.8 mm tie.
Edge clips are heat-stabilized nylon PA66 (6/6), rated −40 °C to 105 °C (−40 °F to 221 °F). Fir-tree and push-mount ties come in standard or heat-stabilized nylon PA66 (6/6). Panel is the panel thickness the part fits.
Project estimatorHow many will your job need? Estimate it →Private labelEdge clips under your brand →