Edge clips

NR-ESC-1Edge clip, 1 to 3 mm panel edge, side tie entry

Order-inData centerFactory and panelSolar and outdoorRobotics and harness

Push onto a panel edge; a metal clamp grips. Takes a 4.8 mm tie.

Brought in against your order, so you get the full range without paying for stock we guessed at. Lead time 24 to 48 hours.

Panel edge: 1 to 3 mm
Tie width: 4.8 mm
Tie entry: Side
Sold by: pack of 100
Catalog page: 6

Item NR-ESC-1 · quoted per pack of 100Priced on quote

Add it to your quote list with the quantity of packs of 100 you need. We reply with price and a ship date within one business day. No minimum order. Case quantities preferred. Order-in lead time 24 to 48 hours.

Edge clips are heat-stabilized nylon PA66 (6/6), rated −40 °C to 105 °C (−40 °F to 221 °F). Fir-tree and push-mount ties come in standard or heat-stabilized nylon PA66 (6/6). Panel is the panel thickness the part fits.

Where the NR-ESC-1 is used

Routing wiring along sheet metal edges without drilling
Vehicle and equipment frames
Solar racking edges

Choosing the right edge clips

Choose by panel thickness (1 to 3 mm or 3 to 6 mm) and by whether the tie enters from the top or the side. They take a 4.8 mm tie.

All edge clips · Edge clips

Every size in this family, with NR-ESC-1 highlighted.

NR-ESS-1per pack of 100
Panel edge
1 to 3 mm
Tie width
4.8 mm
Tie entry
Top
NR-ESS-3per pack of 100
Panel edge
3 to 6 mm
Tie width
4.8 mm
Tie entry
Top
NR-ESC-1per pack of 100
Panel edge
1 to 3 mm
Tie width
4.8 mm
Tie entry
Side
NR-ESC-3per pack of 100
Panel edge
3 to 6 mm
Tie width
4.8 mm
Tie entry
Side

Item	Panel edge	Tie width	Tie entry	Unit
NR-ESS-1	1 to 3 mm	4.8 mm	Top	pack of 100
NR-ESS-3	3 to 6 mm	4.8 mm	Top	pack of 100
NR-ESC-1	1 to 3 mm	4.8 mm	Side	pack of 100
NR-ESC-3	3 to 6 mm	4.8 mm	Side	pack of 100

Also in mounts, clips and clamps

Saddle mounts Push-mount ties Adhesive tie mounts Fir-tree ties R-type cable clamps