Fir-tree tiesMounts, clips and clamps · Fir-tree ties
NR-5.4x210FTTFir-tree tie, 1.9 in max bundle, 6.5 to 7.2 mm hole
40 lb tie with a ribbed stud that pushes into a panel hole.
Brought in against your order, so you get the full range without paying for stock we guessed at. Lead time 24 to 48 hours.
- Max bundle
- 1.9 in
- Hole
- 6.5 to 7.2 mm
- Panel
- 1 to 8 mm
- Sold by
- pack of 100
- Catalog page
- 6
Add it to your quote list with the quantity of packs of 100 you need. We reply with price and a ship date within one business day. No minimum order. Case quantities preferred. Order-in lead time 24 to 48 hours.
Edge clips are heat-stabilized nylon PA66 (6/6), rated −40 °C to 105 °C (−40 °F to 221 °F). Fir-tree and push-mount ties come in standard or heat-stabilized nylon PA66 (6/6). Panel is the panel thickness the part fits.
Where the NR-5.4x210FTT is used
- Push-in fixing for harnesses on panels
- Vehicle and appliance wiring
- Places where a screw is not practical
Choosing the right fir-tree ties
Match the hole diameter and panel thickness range, then check the max bundle size.
NR-5.4x210FTT closes around bundles up to 1.9 in. For smaller, NR-5.3x180FTT (1.2 in).
All fir-tree ties · Fir-tree ties
Every size in this family, with NR-5.4x210FTT highlighted.
- NR-5.3x180FTTper pack of 100
- Max bundle
- 1.2 in
- Hole
- 6.5 to 7 mm
- Panel
- 0.6 to 4.5 mm
- NR-5.4x210FTTper pack of 100
- Max bundle
- 1.9 in
- Hole
- 6.5 to 7.2 mm
- Panel
- 1 to 8 mm