NR-TM-30Adhesive tie mount, 30 × 30 mm base, 6.4 mm tie slot

Order-inData centerFactory and panelSolar and outdoorRobotics and harness

Peel-and-stick foam backing. Most sizes also take a screw.

Brought in against your order, so you get the full range without paying for stock we guessed at. Lead time 24 to 48 hours.

Base: 30 × 30 mm
Tie slot: 6.4 mm
Screw hole: 4.5 mm
Sold by: pack of 100
Catalog page: 6

Item NR-TM-30 · quoted per pack of 100Priced on quote

Add it to your quote list with the quantity of packs of 100 you need. We reply with price and a ship date within one business day. No minimum order. Case quantities preferred. Order-in lead time 24 to 48 hours.

Edge clips are heat-stabilized nylon PA66 (6/6), rated −40 °C to 105 °C (−40 °F to 221 °F). Fir-tree and push-mount ties come in standard or heat-stabilized nylon PA66 (6/6). Panel is the panel thickness the part fits.

Where the NR-TM-30 is used

Mounting ties to smooth surfaces without drilling
Enclosures, desks and equipment housings
Temporary or light-duty routing

Choosing the right adhesive tie mounts

Peel-and-stick foam backing; most sizes also take a screw for a permanent hold. Clean and dry the surface first, and match the tie slot to your tie width.

All adhesive tie mounts · Adhesive tie mounts

Every size in this family, with NR-TM-30 highlighted.

NR-TM-20per pack of 100
Base
20 × 20 mm
Tie slot
4.5 mm
Screw hole
3 mm
NR-TM-25per pack of 100
Base
25 × 25 mm
Tie slot
6.2 mm
Screw hole
3.5 mm
NR-TM-30per pack of 100
Base
30 × 30 mm
Tie slot
6.4 mm
Screw hole
4.5 mm
NR-TM-40per pack of 100
Base
40 × 40 mm
Tie slot
10.8 mm
Screw hole
None

Item	Base	Tie slot	Screw hole	Unit
NR-TM-20	20 × 20 mm	4.5 mm	3 mm	pack of 100
NR-TM-25	25 × 25 mm	6.2 mm	3.5 mm	pack of 100
NR-TM-30	30 × 30 mm	6.4 mm	4.5 mm	pack of 100
NR-TM-40	40 × 40 mm	10.8 mm	None	pack of 100

Also in mounts, clips and clamps

Saddle mounts Edge clips Push-mount ties Fir-tree ties R-type cable clamps