10 Inch Zip Ties
Ten inches is the in-between length that solves a specific annoyance: the 8 inch tie that only just reaches, catching on its final teeth, and the 12 inch tie that leaves a long tail to trim. A 10 inch tie closes around a bundle of approximately 2.5 to 2.75 inches in diameter, with the exact figure depending on strap width and head design. That extra wrap over 8 inch is what lets it lock with a comfortable margin on a bundle of heavy-gauge power cords or a length of split loom full of wire.
10" Zip Ties · Black
100 pack
10" Zip Ties · Natural
100 pack
10" Zip Ties · Black
2 × 100 pack
10" Zip Ties · Natural
2 × 100 pack
10" Zip Ties · Black
100 pack
10" Zip Ties · Natural
100 pack
10" Zip Ties · Black
2 × 100 pack
10" Zip Ties · Natural
2 × 100 pack
Our 10 inch ties are rated 120 lb minimum loop tensile strength, the same heavy-duty class as our 8 and 12 inch ties, so choosing between those three is a question of reach and tidiness rather than strength. All are Nylon 6/6. Black ties are UV-stabilized for outdoor use; Natural Clear White ties are meant for indoor and general work.
This length is especially handy for installers who work with tubing and loom. Drip irrigation line held to a stake or post, a wire harness in convoluted tubing along a frame rail, or a pair of garden hoses bundled for storage all tend to land in the 2 to 2.75 inch range where a 10 inch tie fits without fuss.
Compare what's in stock
Typical uses
Split loom and wire harnesses
Closing split loom or convoluted tubing around a wire bundle and securing it along a frame rail on trailers, equipment and vehicles.
Drip line and irrigation tubing
Holding poly tubing and drip line to stakes, posts and trellis wire in gardens, nurseries and orchards. Use Black ties where they will sit in the sun.
Heavy power cords
Grouping thicker appliance and equipment cords behind machines or along benches, where an 8 inch tie runs out of strap.
Temporary signs and banners
Attaching lightweight signs and banners through grommets to fence rails or railings for events and job sites, with ties spread along the edge so no single tie takes the wind.
Is a 10 inch zip tie right for your job?
Choose 10 inch when your bundles run a little over 2 inches, or when 8 inch ties keep ending up at their limit. It is also a good single size for vehicle and equipment wiring, where bundles and loom tend to fall in that range.
If you regularly wrap posts, pipe or bundles closer to 3 inches, the 12 inch length gives you more room. For thin cords and cables where tail waste matters, 8 inch stays the tidier choice. In our current range all three lengths share the 120 lb rating.
| Length | Approx. bundle diameter | Rating in our current range | Good for |
|---|---|---|---|
| 8 in | About 2 to 2.25 in | 120 lb | Cords, patch cables, garden and shop bundles |
| 10 in | About 2.5 to 2.75 in | 120 lb | Split loom, drip line, heavy cords |
| 12 in | About 3 to 3.5 in | 120 lb | Fencing, conduit and pipe, larger bundles |
Frequently asked questions
What is the bundle diameter of a 10 inch zip tie?
Approximately 2.5 to 2.75 inches. The exact capacity depends on the strap width and head design, so leave a little margin for a secure lock.
Is a 10 inch zip tie stronger than an 8 inch one?
Not in our current range: our 8, 10 and 12 inch ties are all rated 120 lb. Length changes how large a bundle the tie can close around, not its tensile rating.
Are 10 inch zip ties good for wire loom?
Yes. Loom and harness bundles often fall in the 2 to 2.75 inch range, where a 10 inch tie locks with some margin. Route the harness away from exhaust components and moving parts.
Buying for a crew, a store or a project?
Business accounts get price-list pricing with quantity breaks, net terms once approved, tax-exempt purchasing with a resale certificate, and team logins.
Related guides
Zip ties by industry
- Cable Ties for Automotive UseBlack ties for anything under the car or in the engine bay
- Cable Ties for Agriculture and IrrigationBlack UV-stabilized ties for fields, orchards and greenhouses
- Cable Ties for Electrical Contractors4-inch and 8-inch ties for panel dressing and device wiring
- Cable Ties for Facilities and MaintenanceFour or five standard lengths cover nearly every maintenance job